Membuat kabel network

Ini topik lama, tapi kadang-kadang saya masih perlu membuat kabel network.

Yang saya pakai adalah : T-568B
dan kalau di test di network cable tester... tetap berurutan 1 s/d 8 normal

mengInstall PjSIP

mengInstall PjSIP
di Raspberry Pi


sudo apt-get install libv4l-dev libx264-dev libssl-dev libasound2-dev asterisk


SDL

cd
mkdir tmp
cd $HOME/tmp
wget http://www.libsdl.org/tmp/SDL-2.0.tar.gz
tar xvfz SDL-2.0.tar.gz
cd SDL-2.0.0-7125/
./configure
make
sudo make install

FFMPEG

cd $HOME/tmp
wget http://ffmpeg.org/releases/ffmpeg-0.10.7.tar.bz2
tar xvfj ffmpeg-0.10.7.tar.bz2
cd ffmpeg-0.10.7
./configure --enable-shared --disable-static --enable-memalign-hack --enable-gpl --enable-libx264
make
sudo make install

Build PjSIP

cd $HOME/tmp
wget http://www.pjsip.org/release/2.1/pjproject-2.1.tar.bz2
tar xvfj pjproject-2.1.tar.bz2
cd pjproject-2.1.0/
./configure --disable-video
make dep
make

Network di Beagleboard

Setting /etc/network/interfaces



auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp
# Example to keep MAC address between reboots
#hwaddress ether DE:AD:BE:EF:CA:FE

# WiFi Example
auto wlan0
iface wlan0 inet dhcp
 wireless-essid AZANA16-2

#    wpa-ssid "essid"
#    wpa-psk  "password"